Search results for 'green laser'
-
$35.00sharp 520nm 135mW Green Laser Diode 5.6mm no PD GH0521DE2G
-
-
-
$19.98Out of stock
Specification:
1. +10~+35 centigrade
2. Dust/water-proof cover which will protect the laser when it cuts stones or woods.
4. Bigger housing for longer duty cycle.
5. 12VDC adapter for more stable power supply -
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$20.00 As low as: $15.0016mm 510nm 515nm 520nm 30mW Cross Hair Green Laser Diode Module for Screen Printing Heat Press Wood Print Cloth Fabric Alignment -
$20.00 As low as: $15.00specifications:
escape room
haunted house
bird scare
laser swamp
laser cutting machine locating
-
$39.00 As low as: $35.10Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
- Spinning machine location
-
-
$90.00Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
Specification
1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.
2. when you adjust the laser beam for fatter, it can be used as stage lighting.
3. when you use the pwm, the pulse output is 1.25w, it is suitable for engraving, marking or cutting.
4. when you use it as cw output, it is 1-1.05w output.
5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.
6. it is very bright so that when we use it on stage lighting, it get very good effect
-
$35.00Out of stock
Specification:
1. Low Temperature turns on. This laser can work in winter for temperature at -25 centigrade
2. High temperature working: this laser can work on summer when the working temperature is over 40 centigrade.
3. Dust/water-proof cover which will protect the laser when it cuts stones or woods.
4. Bigger housing for longer duty cycle.
5. 12VDC adapter for more stable power supplyComparing with 532nm laser modules, this one is better at those areas:
1. wider working temperatuer from -25~45 centigrade
2. stable wavelength, no red bomb.
3. working in more seriously conditions. -
$45.98 As low as: $43.50Out of stock
9.0mm TO-5 Nichia NDB7775 1.6w-2w 445nm 450nm Blue Laser LD Diode -
$69.98 As low as: $62.98Out of stock
9.0mm TO-5 Nichia NDB7675 462nm 1.4W Blue Laser LD Diode Brand New -
$26.00dark green lens: for lighting with more red brown lens: for lighting with more green and blue light -
$26.98 -
-
$5.49Temp-BG 405nm 445nm Blue 532nm Green Laser Eyewear Protection Goggles Safety Glasses
