Search results for 'blue laser'

3D Structural Lighting Source

K9 Laser Optical Prism Line Glass Lens Powell Lens 9mm input laser beam diameter 1mm

FC SMA905 Fiber Laser Focusable Collimation Lens 400-1100nm

1. not for handheld 2. for movie green screen use 3. for stage lighting as pic shows with fog. 4. duty cycle for 5mw is 6-8hrs, duty cycle for 80mw is 3-5hrs.

650nm DOE Diffractive Gratings Red Laser Module 3D Structural Lighting Source

3D Structural Light Souce
3D scanning laser

532nm 50mW Green Fat Beam Laser Module KTV Party Club Stage Lighting

Specification
1. stage lighting
2. building location
3. laser curtain
4. bird scaring

5. beam diameter: 15mm

Function:

1. laser curtain

2. escape room

3. stage lighting

4. ktv

5. wine base

6. laser harp

7. laser landmark

8. high-way warning light

Specification

wavelength： 905nm

output：25w

Features

1. specially used for emboidery machine

2. 5 degree cross hair can also be used on sewing maching and marking machines

3. texitile Machine use

4. needle craft use

1. night vision

2. night scanner

3. cold laser therapy

4. LLLT

 

Usage:

1. Stage lighting shows

2. Scare birds and animals

3. Laser curtain

4. Laser harp

5. Laser wine bar base

6. Escape room

7. Amusement park

8. Pleasure groud and squares

9. Holiday lighting effect

10. PM 2.5 PM 10 dust/humid testing

11. Spinning machine location

Can engrave:

Wood, plastic, paper, leather

Can cut:

Paper, thin leather, thin wood plate

Cannot engrave:

Metal, glass, stone, etc

Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.

 

Specification

1. when you adjust the beam diameter at 20-200mm, the beam is 0.5-0.8mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.

2. when you adjust the laser beam for fatter, it can be used as stage lighting. because of the fat beam, we normally recommend it as stage lighting

3. the beam is not round, it is 1:3 rectangle

4. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.

Can engrave:

Wood, plastic, paper, leather

Can cut:

Paper, thin leather, thin wood plate

Cannot engrave:

Metal, glass, stone, etc

Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.

 

Specification

1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.

2. when you adjust the laser beam for fatter, it can be used as stage lighting.

3. when you use the pwm, the pulse output is 1.25w, it is suitable for engraving, marking or cutting.

4. when you use it as cw output, it is 1-1.05w output.

5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.

6. it is very bright so that when we use it on stage lighting, it get very good effect