Search results for 'green laser'
-
$8.80Fat Beam 520nm 30mW Green Laser Module for KTV Bar DJ Stage Lighting Effects -
$3.98Laserland 0611 Small Volume 515nm Green Dot Laser Generator Module 5mW 5V -
$29.9826mm Water Resistant Green 35mW Line Generator laser module for Wood Metal Stone Cutting Locator -
$19.98Laser Curtain
Wine Base
Bar
KTV use
Stage Lighting
Escape Room
Haunted House
Halloween Holiday use
Fan Cooling can work for long duty cycle
It can also be used by USB and power bank.
Can work with motorbike electronic system.
Easily installed on wall.
-
$119.98Out of stock
0.8W 520nm Bird-Scaring High-Power Green Laser Module with Fan TTL
-
$25.001. not for handheld 2. for movie green screen use 3. for stage lighting as pic shows with fog. 4. duty cycle for 5mw is 6-8hrs, duty cycle for 80mw is 3-5hrs. -
$25.00Green Dot Matrix Laser Module
-
$121.991W Fat Beam Green Laser Diode Diode Laser Module Stage Lighting Effect with Fan -
$19.003D Structural Light Souce
3D scanning laser -
$5.50515nm 35mW Green Dot Laser Module with no Driver 12*15mm -
$69.98Out of stock
Focusable 12*55 powell lens 110 degree Green 510nm 10mw Laser Line Module for Machine Vision use -
$19.98Out of stock
Specification:
1. +10~+35 centigrade
2. Dust/water-proof cover which will protect the laser when it cuts stones or woods.
4. Bigger housing for longer duty cycle.
5. 12VDC adapter for more stable power supply -
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$20.00 As low as: $15.0016mm 510nm 515nm 520nm 30mW Cross Hair Green Laser Diode Module for Screen Printing Heat Press Wood Print Cloth Fabric Alignment -
$20.00 As low as: $15.00specifications:
escape room
haunted house
bird scare
laser swamp
laser cutting machine locating
-
$90.00Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
Specification
1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.
2. when you adjust the laser beam for fatter, it can be used as stage lighting.
3. when you use the pwm, the pulse output is 1.25w, it is suitable for engraving, marking or cutting.
4. when you use it as cw output, it is 1-1.05w output.
5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.
6. it is very bright so that when we use it on stage lighting, it get very good effect
