Search results for 'blue laser'

Usage:

1. Stage lighting shows

2. Scare birds and animals

3. Laser curtain

4. Laser harp

5. Laser wine bar base

6. Escape room

7. Amusement park

8. Pleasure groud and squares

9. Holiday lighting effect

10. PM 2.5 PM 10 dust/humid testing

520nm 30mw Green Dot Laser Module Diode DC/AC 12V Stage Lighting TTL 0-5V

520nm 100mw Green Laser dot Module Diode Stage Lighting Long Duty 12VDC TTL

16mm 510nm 515nm 520nm 30mW Dot Green Laser Diode Module 

Features Low working temperature from - 15 centigrade Stable output by the green laser diode in Suitable for green laser level Used in green laser rangefinder FDA standard

Feature:

Unique Color of Laser Beam, Pure Green or Light Green

Stable Performance for the laser light is directly from Laser diode not transversed from 808nm laser diode

No IR included like 532nm laser

Output stable at a much broader temperature range

Suitable for wood cutting, construction site, alignment, locating

Can be used in escap room stage lighting

Specification:
1. Low Temperature turns on. This laser can work in winter for temperature at -25 centigrade
2. High temperature working: this laser can work on summer when the working temperature is over 40 centigrade.
3. Dust/water-proof cover which will protect the laser when it cuts stones or woods.
4. Bigger housing for longer duty cycle.
5. 12VDC adapter for more stable power supply

Comparing with 532nm laser modules, this one is better at those areas:
1. wider working temperatuer from -25~45 centigrade
2. stable wavelength, no red bomb.
3. working in more seriously conditions.

Can engrave:

Wood, plastic, paper, leather

Can cut:

Paper, thin leather, thin wood plate

Cannot engrave:

Metal, glass, stone, etc

Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.

 

Specification

1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.

2. when you adjust the laser beam for fatter, it can be used as stage lighting.

3. when you use the pwm, the pulse output is 1.25w, it is suitable for engraving, marking or cutting.

4. when you use it as cw output, it is 1-1.05w output.

5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.

6. it is very bright so that when we use it on stage lighting, it get very good effect

Usage:

1. Stage lighting shows

2. Scare birds and animals

3. Laser curtain

4. Laser harp

5. Laser wine bar base

6. Escape room

7. Amusement park

8. Pleasure groud and squares

9. Holiday lighting effect

10. PM 2.5 PM 10 dust/humid testing

11. Spinning machine location

specifications:

escape room

haunted house

bird scare

laser swamp

laser cutting machine locating

16mm 510nm 515nm 520nm 30mW Cross Hair Green Laser Diode Module for Screen Printing Heat Press Wood Print Cloth Fabric Alignment

Features

1. Stage Lighting

2. PM2.5 PM10 testing

Instructions for use:

1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.

2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.

3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.

4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.

Specification:
1. +10~+35 centigrade
2. Dust/water-proof cover which will protect the laser when it cuts stones or woods. 
4. Bigger housing for longer duty cycle.
5. 12VDC adapter for more stable power supply

Focusable 12*55 powell lens 110 degree Green 510nm 10mw Laser Line Module for Machine Vision use

515nm 35mW Green Dot Laser Module with no Driver 12*15mm